Mineral Inactivation of Zinc in Polluted Soil—Sustainability of Zeolite, Bentonite and Blends

The study outlines a novel and traceable procedure for inactivating zinc polluted soil (an Anthrosols) adjacent to a former zinc (Zn) ore mine “Orzel Bialy” in Bytom (Poland), where the total content of Zn amounted to 3988.0 mg kg−1. This pollution level initiated an inactivation process involving two natural mineral sorbents, i.e., zeolite (Z) and bentonite (B), as well as their five blends (ZeoBen) expressed as ZB: (1) ZB15/85, (2) ZB30/70, (3) ZB50/50, (4) ZB70/30 and (5) ZB85/15. Next, phosphorus (P) as triple superphosphate (TSP, 46% P2O5) was added to individual ZB at rates: 0.25%, 0.5%, 1.0% and 2.0%. All sorbents were added to the Zn polluted soil at 0%, 0.25%, 0.5%, 1.0% and 2.0% (dry weight basis). Treatments (1.0 kg of Zn-polluted soil with ZB sorbents) were aged for 115 days. Data revealed that ZB85/15 with prevailing zeolite caused a Znact inactivation of 66–71%, while zeolite induced 54% and 47% for bentonite. Reactive zinc (Znreac) decreased much more (20%) when zeolite was incorporated at the rate 2.5 g·kg−1 soil, and bentonite was (10%) at the same rate. The application of the sorbent ZB50/50 enriched with triple superphosphate (TSP) raised the stabilization degree for both Zn fractions. The efficiency was significant at the TSP rate of 2.0% of the sorbent and at least the sorbent +TSP of 10 g·kg−1 soil. The cation exchange capacity (CEC) of about 2 cmol(+)·kg−1 controlled the activity −0.50 mmol·dm−3 of either γZnreac or γZnact, hence a very low zinc ionic activity. The use of mineral blends with higher sharing of zeolite is promising for remediating metal-polluted lands in the case of zinc.