Deformation mechanism and texture evolution of a low-Ni Cr–Mn–N austenitic stainless steel under bending deformation

Abstract The detailed evolution of microstructure and texture of a low-Ni Cr–Mn–N austenitic stainless steel under bending deformation was studied. The effect of austenite grain orientation on the deformation-induced transformation and deformation twinning mechanisms was investigated in selected grains of analogous orientation located near the outer and inner radius, where distinct deformation mechanisms have been identified in different regions accordingly. With moving towards the outer radius, the concurrent occurrence of transformation- and twinning-induced plasticity was detected, while with moving towards the inner radius, twinning-induced plasticity was hindered. Texture of austenite showed the characteristic single fibre for face-centred cubic materials with a stronger intensity around the αγ –fibre. The deformation-induced e-martensite returned an intense { h k i l } e fibre. The 10 1 ‾ 2 " open=" 1 ‾ 011 e extension twinning was detected only in regions near to inner radius. Interestingly, the deformation-induced αʹ-martensite showed the uncommon h 11 " open=" 1 / h , 1 , 2 fibre upon bending deformation.