Multi-step ion beam etching of sub-30 nm magnetic tunnel junctions for reducing leakage and MgO barrier damage

2012 
We have demonstrated the fabrication of sub 30 nm magnetic tunnel junctions (MTJs) with perpendicular magnetic anisotropy. The multi-step ion beam etching (IBE) process performed for 18 min between 45° and 30°, at 500 V combined ion supply voltage, resulted in a 55 nm tall MTJ with 28 nm diameter. We used a negative tone electron beam resist as the hard mask, which maintained its lateral dimension during the IBE, allowing almost vertical pillar side profiles. The measurement results showed a tunnel magneto-resistance ratio of 13% at 1 kΩ junction resistance. With further optimization in IBE energy and multi-step etching process, it will be possible to fabricate perpendicularly oriented MTJs for future sub 30 nm non-volatile magnetic memory applications.
    • Correction
    • Source
    • Cite
    • Save
    • Machine Reading By IdeaReader
    13
    References
    14
    Citations
    NaN
    KQI
    []