Electrochromic and photoluminescence properties of cobalt oxide thin films prepared by spray pyrolysis
2019
AbstractCobalt oxide thin films were prepared by a facile spray pyrolysis technique, using a perfume atomizer with an aqueous solution of hydrated cobalt chloride salt with a molar concentration of 0.025 M as a source of cobalt. The films were deposited onto glass substrates at temperature of 350 °C. The structural, morphological, and electrochromic properties of the obtained films were studied. It was found from X-ray diffraction analysis that the films were polycrystalline in nature with spinel-type cubic structure and preferred orientation along [111] direction. The Scanning Electron Microscopy images revealed a porous structure with the average grain size around 200 nm. The cyclic voltammetry measurements revealed that Cobalt oxide thin film is an anodically coloring electrochromic material with a transmittance variation in the visible range of 31%, and a fast response time (about 2 seconds) and a good cycling stability. These electrochromic performances make cobalt oxide thin film an attractive mater...
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
37
References
7
Citations
NaN
KQI