New Experimental Results of NO Removal from Simulated Flue Gas by Wet Scrubbing Using NaClO Solution

Both cyclic and noncyclic scrubbing experiments were conducted to remove NO from simulated flue gas in a lab-scale countercurrent spraying reactor. The effects of various operating parameters (initial solution pH, NaClO concentration, absorbent temperature, and inlet NO and SO2 concentrations) on NO removal efficiencies were investigated in the noncyclic scrubbing mode. The results showed that NO removal efficiency increased greatly with the decrease of the initial pH value. However, there was a drop in NO removal efficiency, possibly due to the NO2 absorption in the gas phase. NO removal efficiency increased gradually with the increase of the NaClO concentration. Complete removal of NO was achieved when the NaClO concentration was 24 × 10–3 mol·L–1. However, the NO removal efficiency obviously decreased with the absorbent temperature increasing from 303 to 343 K. This could be mainly ascribed to the decrease of the water solubility of NO2 and the absorption reaction of NO2 with water vapor. Furthermore, ...