A critical assessment of standard processing methods for the preparation of palynological samples

Abstract Standard processing techniques for the isolation of organic walled dinoflagellate cysts from geological samples are examined, with particular attention to the size and type of sieve mesh used. Variations within the ‘standard’ processing techniques used by different laboratories are identified, and an assessment of the retention capacities of meshes of different sizes and different materials is carried out. Some dinoflagellate cysts and large numbers of Lycopodium spores, used for the calculations of absolute abundance data, were found to pass through 20 μm meshes. This is due to a combination of factors including: the diagonal aperture diameter of a 20 μm mesh measuring over 28 μm; the three-dimensional properties of different mesh weaves (nylon and polyester); and the non-spherical shape of the particles. Experiments demonstrate that the maximum mesh size that should be used in palynological processing is 15 μm. Nylon mesh is more practical to use than polyester as processing time is reduced, but nylon is degraded by contact with acid solutions. Meshes with apertures