A geometric approach for the workspace analysis of two symmetric planar parallel manipulators

The workspace is often a critical parameter for optimum design of parallel manipulators. Workspace shape and area are two important considerations under this. In this paper, 5-R and 3-RRR planar parallel manipulators having symmetric link lengths are considered for workspace analysis. Here, symmetric means that the lengths of the first and second links of the legs are the same in all branches. Workspace analysis for such manipulators is normally done in a nondimensional way. The determination of the workspace area is one of the important parameters in the optimum design of a manipulator, and the determination of the area in terms of nondimensional parameters is extremely difficult in the case of 3-DOF and higher-DOF manipulators. In this paper, a geometric method is presented to determine different workspace shapes and areas. Based on this, all possible shapes of workspace are presented for both 5-R and 3-RRR planar parallel manipulators. For each case, a geometrical relationship between the link lengths is determined. The geometric approach gives a closed-form expression for the area calculation, which is not possible when adopting a nondimensional approach. In addition, this approach provides relationships between workspace shape and area and link lengths.