Reduction of saltwater intrusion by modifying hydraulic conductivity

We present an approach for reducing saltwater intrusion in coastal aquifers by artificially reducing the hydraulic conductivity in the upper part of selected areas by using a precipitate. We apply a previously presented analytical approach to develop formulas useful for the design of artificial barriers. Equations for the location of the tip of the saltwater wedge are presented and verified through a sand-tank experiment. The analysis is capable of computing discharges exactly, but requires the Dupuit-Forchheimer approximation to compute points of the interface between flowing fresh and stationary saltwater. We consider a vertical coastline and boundaries in the fresh water zone of either given discharge or given head. We demonstrate in the paper that reduction of the hydraulic conductivity in the upper part of a coastal aquifer will result in a decrease of saltwater intrusion, and present analytic expressions that can be used for design purposes. The previously presented analytical approach can be applied to design systems to reduce salt-water intrusion caused by pumping inland from the zone that contains salt groundwater. This article is protected by copyright. All rights reserved.