Natural gas storage in activated carbon pellets without a binder

Abstract Activated carbon pellets without a binder from cellulose microcrystals as a raw material were investigated. After compression of the raw materials, the thus obtained raw material pellets were slowly carbonized to 1073 K under nitrogen. To activate them, the carbon pellets were heated to 1173 K under carbon dioxide. The activated carbon pellet shape, after heat treatment, was columnar by using the previous employed compression of the raw material. The total surface area, pore volume, and average pore diameter for all the samples were evaluated from the analysis of N 2 adsorption isotherm data. The total surface area and the pore volume were decreased with an increase in compression pressure under the same heat treatment conditions. On the contrary, the bulk densities of the activated carbon pellets were increased. However, these properties can be easily controlled by changing the sintering temperature and time. The bulk density of sample pellet was 0.56 g/cm 3 . It is 2.3 times higher than activated carbon powder, which was made without the compression process. The total methane storage capacity at 298 K reached 164 cm 3 in 1 cm 3 volume of activated carbon pellets at 3.5 MPa.