Marginal fit of metal ceramic restorations subjected to a standardized postsoldering technique

Abstract The fit of a fixed partial denture (FPD) is fundamental for the clinical success of a restoration. When a postsoldering procedure is needed, a high-precision laboratory technique is necessary to not affect the fit of the FPD. This article evaluates whether a standardized postsoldering technique affected the marginal fit of a 3-unit high palladium alloy FPD. One hundred and eight measurements were made of 3-unit FPDs, fabricated in a high palladium alloy (2% Au-79% Pd-10% Cu-8% Ga) and constructed on 9 tin dies in vitro. After the castings were fabricated, specimens were measured at 3 specific points per abutment (distal, labial, lingual) before and after soldering. Differences were found in the marginal opening of both copings, before soldering (49.9 μm) and after soldering (48.3 μm). There was no significant difference in the adaptation of the copings after the soldering procedure (P