Development of a novel anemometry technique for velocity and temperature measurement
2018
Hot-wire anemometry is a widely used measurement technique for obtaining local velocities or temperatures in a flow-field. Operated under constant temperature or constant current the small diameter wires can resolve high-frequency velocity or temperature fluctuations with a high degree of spatial and temporal resolution. Therefore, more or less sophisticated hardware, e.g. using a Wheatstone bridge for constant temperature anemometry (CTA), is used with relatively high acquisition costs. In this paper a new technique is used, where the wire temperature or current is digitally controlled via a FPGA unit. The electric circuit is simpler than the usual set-ups and the hardware used is very robust, allowing to operate the control unit under harsh environments. This allows also to reduce the cable lengths, and therefore, eventually to increase the frequency response of the hot wire. The application of this technique for measurements of aerodynamic and thermal boundary layers under varying Reynolds numbers for laminar and turbulent boundary layers is demonstrated. The results are compared to measurements with standard CTA system and show that similar results are obtained with this new technique.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
5
References
1
Citations
NaN
KQI