On the use of SEREP for satellite FEM validation

Purpose – The purpose of this paper is to assess the suitability of various methods for the reduction of a large finite element model (FEM) of satellites to produce models to be used for correlation of the FEM with test results. The robustness of the cross‐orthogonality checks (COC) for the correlation process carried out utilizing the reduced model is investigated, showing its dependence on the number of mode shapes used in the reduction process. Finally the paper investigates the improvement in the robustness of the COC that can be achieved utilizing optimality criteria for the selection of the degrees of freedom (DOF) used for the correlation process.Design/methodology/approach – A Monte Carlo approach has been used to simulate inaccuracies in the mode shapes (analysis and experimental) of a satellite FEM that are compared during the COC. The sensitivity of the COC to the parameters utilized during the reduction process, i.e. mode shapes and DOFs, is then assessed for different levels of inaccuracy in ...