Warm plasma activation of CO2 in a rotating gliding arc discharge reactor

Abstract In this study, a rotating gliding arc (RGA) warm plasma has been developed for the conversion of CO 2 into CO and O 2 . The effect of feed flow rate, applied voltage, arc current, and the addition of N 2 or Ar on the reaction performance has been investigated. The results show two variation patterns of CO 2 conversion and energy efficiency, depending on the specific energy input (SEI): In Pattern A with SEI > 3.5 kJ/L, the CO 2 conversion and energy efficiency decrease simultaneously with increasing SEI, while in Pattern B with SEI ≤ 3.5 kJ/L, the energy efficiency and the CO 2 conversion show an opposite trend. The recombination of CO and O at high temperatures could be responsible for the decrease of CO 2 conversion with rising SEI due to the increased retention time or gas temperature. A CO 2 conversion of 4.0-4.4% and energy efficiency of 16-17% can be achieved. Compared to other non-thermal plasmas, the RGA plasma exhibits a lower CO 2 conversion but higher energy efficiency, whilst maintaining a flow rate (e.g, 6-7 L/min) that is significantly higher than that of typical non-thermal plasmas (e.g., 20-125 ml/min in dielectric barrier and corona discharges). Increasing the fraction of N 2 or Ar promotes the conversion of CO 2 but lowers the energy efficiency. N 2 is clearly more beneficial for enhancing the CO 2 conversion in comparison to Ar. Further enhancement of the reaction performance can be expected by cooling the plasma area to lower the gas temperature, to limit the recombination of CO and O.