Etching Shapes the Topography of Silicon Wafers: Lattice-Strain Enhanced Chemical Reactivity of Silicon for Efficient Solar Cells

Multiwire sawing of silicon (Si) bricks is the state-of-the-art technology to produce multicrystalline Si solar wafers. The massive indentation of the abrasive Si carbide or diamond particles used leads to a heavily mechanically damaged layer on the wafer surface. Etching the surface layer using typical HF–HNO3–H2SiF6 acid mixtures reveals an unevenly distributed etch attack with etch rates several times higher than known for bulk Si etching. The present study follows the hypothesis that lattice strain, introduced by the sawing process, leads to an increase of the etch rate and determines the topography of the etched wafer, the so-called texture. Scratches were introduced into single crystalline Si surfaces in model experiments, and the magnitude and local distribution of lattice strain were extracted from confocal Raman microscopy measurements. The essential parameter used to describe the local reactivity of Si is the local etch rate, which was derived by confocal microscopy from the local height before ...