Development of the HiLightTM scintillator for computed tomography medical imaging

Abstract The image quality of computed tomography (CT) medical scanners is extremely sensitive to afterglow, radiation damage and optical non-uniformities of scintillators used in X-ray detectors. This represents a tough challenge in the design of scintillator materials with optimum properties. Discussion will center on the development and properties of the first commercialized transparent ceramic scintillator, the (Y,Gd) 2 O 3 :Eu-based HiLight TM scintillator used in GE Medical System's CT products. The flexibility of the ceramic scintillator platform has enabled it to be engineered to satisfy the changing needs of CT imaging, which is demonstrated by its successful incorporation into over 8000 CT systems worldwide since 1988. The ceramic process makes possible uniform co-doping at ppm levels to control electronic defects responsible for afterglow, reducing it to levels below detectibility in CT images. Annealing of the material in controlled oxygen atmospheres, combined with rapid oxygen diffusion along grain boundaries in the ceramic, reduces radiation damage to negligible values. Transient thermoluminescence of these materials will be discussed as a diagnostic of electronic trap levels responsible for both afterglow and radiation damage. Finally, with the increased scan speed requirements of modern CT systems, energy transfer between the Eu activator and other rare-earth ions can be used to speed the radiative decay of the scintillator, ensuring the material's continued viability in future CT systems.