The analysis and attribution of the time-dependent neutron background resultant from sample irradiation in a SLOWPOKE-2 reactor

The Royal Military College of Canada (RMCC) has commissioned a Delayed Neutron Counting (DNC) system for the analysis of special nuclear materials. A significant, time-dependent neutron background with an initial maximum count rate, more than 50 times that of the time-independent background, was characterised during the validation of this system. This time-dependent background was found to be dependent on the presence of the polyethylene (PE) vials used to transport the fissile samples, yet was not an activation product of vial impurities. The magnitude of the time-dependent background was found to be irradiation site specific and independent of the mass of PE. The capability of RMCC’s DNC system to analyze the neutron count rates in time intervals <1 s facilitated a more detailed data analysis than that obtained in previous DNC systems recording cumulative neutron counts. An analysis of the time-dependent background behaviour suggested that an equivalent of 120 ng of 235U contamination was present on each irradiated vial. However, Inductively Coupled Plasma—Mass Spectroscopy measurements of material leached from the outer vial surfaces after their irradiations found only trace amounts of uranium, 0.118 ± 0.048 ng of 235U derived from natural uranium. These quantities are insufficient to account for the time-independent background, and in fact could not be discriminated from the noise associated with time-independent background. It is suggested that delayed neutron emitters are deposited in the vial surface following fission recoil, leaving the main body of uranium within the irradiation site. This hypothesis is supported by the physical cleaning of the site with materials soaked in distilled water and HNO3, which lowered the background from a nominal 235U mass equivalent of 120 to 50 ng per vial.