Chemical and Mechanical Analysis of HDIS Residues using Auger Electron Spectroscopy and Nanoindentation
2009
Photoresist stripping after ion implantation at high dosages (>1E15 atoms/cm2) is the most challenging dry strip process for advanced logic devices. Such high-dose implant stripping (HDIS) frequently leaves residues on the wafers after dry strip, unless fluorine chemistries are employed in the stripping plasma. Silicon loss requirements at sub-45nm nodes generally preclude such aggressive stripping chemistries. Instead, a wet clean is used to remove residues. However, the nature of the residues is not well understood, and are believed to usually contain some of the cross-linked, carbonized organic polymer formed in the implant [1]. In this paper we present chemical and mechanical data on HDIS residues produced from oxidizing and reducing chemistry strip processes.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
0
References
2
Citations
NaN
KQI