Porphyrin and metalloporphyrin binding to DNA polymers: rate and equilibrium binding studies

: Interactions of meso-tetrakis(4-N-methylpyridiniumyl)porphyrin [TMpyP(4)] with poly[d(G-C)].poly[d(G-C)] [poly[d(G-C)2] and poly[d(A-T)].poly[d(A-T)] [poly[d(A-T)2] were studied by equilibrium dialysis and stopped-flow dissociation kinetics as a function of [Na+]. Metalloderivatives of TMpyP(4), NiTMpyP(4), and ZnTMpyP(4) were also investigated. The apparent equilibrium binding constants (Kobs) were approximately the same for TMpyP(4) binding to either poly[d(G-C)2] or poly[d(A-T)2] and decreased with increasing [Na+]. The slopes of the plots of log Kobs vs log [Na+] were similar, with values close to -2.7. Contrary to implications in previously reported studies, these data do not indicate that TMpyP(4) prefers to bind to GC sites at low ionic strength and to AT sites at high ionic strength. In contrast, binding of ZnTMpyP(4) to these two polymers is very different. Comparisons of Kobs values at 0.065 M [Na+] indicate that ZnTMpyP(4) binding to AT sites is approximately 200 times more favorable than binding to GC sites, a finding in agreement with previous qualitative observations. Although the binding of the Zn species to the GC polymer was too weak for us to assess the salt effect, the plot of log Kobs vs log [Na+] gave a slope of -2.0 for ZnTMpyP(4) binding to poly[d(A-T)2]. Application of condensation theory for polyelectrolytes suggests similar charge interactions for ZnTMpyP(4) and for TMpyP(4) binding to poly[d(A-T)2]. Likewise, the rates of dissociation from poly[d(A-T)2] were similar for TMpyP(4) and ZnTMpyP(4) [and also NiTMpyP(4)]. However, whereas TMpyP(4) [and NiTMpyP(4)] dissociation from poly[d(G-C)2] was measurable, that for ZnTMpyP(4) was too fast to measure.(ABSTRACT TRUNCATED AT 250 WORDS)