Validation of attitude/deformation sensing techniques for space flexible manipulators

Abstract This paper proposes an approach that makes use of two different techniques to sense and identify both the rigid attitude motion and the flexible dynamics of a manipulator. With the first technique, an accurate attitude motion determination, based on the use of a global navigation satellite systems (GNSS) signals, is performed. For this purpose, some antennas are placed on the manipulator in order to obtain the observable phase of the GNSS signal. The second technique, based on the use of accelerometer sensors, is used in order to identify the dynamic signature during the motion of the flexible link. Specifically, the modal parameters are estimated using data recorded from accelerometers, conveniently placed on the structure, by means of an output-only based approach. The developed algorithms used for both the attitude estimation and the output-only modal analysis are validated by experimental activities carried out on an in-house testbed representing a two flexible arm manipulator.