Taylor-Couette flow and transient heat transfer inside the annulus air-gap of rotating electrical machines

Losses in an electric motor amount to between 4–24% of the total electrical power, and are converted to heat. The maximum hot spot temperature is one of the design constraints of thermal and electrical performance. Several studies have explored flow and thermal characteristics inside the air-gap between two concentric rotating cylinders such as those found in electric motors, however the transient flow and thermal effects still remain a challenge. This study uses Computational Fluid Dynamics to predict the thermal behaviour of a machine rotating at the kind of speed usually encountered in motors. The Reynolds Averaged Navier-Stokes model together with the realizable k-e turbulence model are used to perform transient simulations. Velocity profiles and temperature distribution inside the air-gap are obtained and validated. The transient flow features and their impact on thermal performance are discussed. The numerical results show turbulent Taylor vortices inside the air-gap that lead to a periodic temperature distribution. When compared to correlations from published literature, the simulated average heat transfer coefficient at the rotor surface shows overall good agreement. The transient effects introduce local impacts like oscillations to the Taylor-Couette vortices. These flow oscillations result in oscillations of the hotspots. However, this transient oscillatory behaviour does not show any additional impact on the global thermal performance.