Experimental study on a new method to forecasting goaf pressure based key strata deformation detected using optic fiber sensors

Abstract The spatial distribution of rock mass stress in goaf seriously affects the stable operation of underground reservoir. Measurement of stress distribution in the goaf of coal mines is difficult due to the complex internal environment and other restrictive conditions of goaf. This paper presents a new method of monitoring the deformation of key stratum in overburden by optical fiber sensing, and then characterizing the pressure of goaf. The internal mechanism of key stratum breakage and the variation of goaf stress is investigated by physical model with the geometric dimension of 3 (length) × 1.3 (height) × 0.4 (width) m), in which the Brillouin Optical Time Domain Analysis (BOTDA) fiber-optic sensing technology and Fiber Bragg Grating (FBG) technology are used to monitor the stability of key stratum and the non-contact Digital Image Correlation (DIC) technique is employed to provide real-time deformation measurements. Combining the fracture mechanics model of key strata with the parabolic function model of subsidence trajectory, the stress evolution model of coal seam mining space is established for the first time, the goaf pressure change and the corresponding relation between the key layer breakage was quantitatively characterized. The research results show that: The fracture location of the key strata is consistent with the peak stress location of the goaf. The breaking limit strain threshold value of the key strata based on optical fiber sensing detection is 4000 μe. Through the inversion of optical fiber monitoring results, the fracture degree and range of overburden rock in goaf are obtained, thus reflecting the position and change of the peak pressure in goaf. The consistency between key layer deformation and goaf pressure variation is verified.