Analysis of liner performance using the NASA Langley Research Center Curved Duct Test Rig

Abstract The NASA Langley Research Center Curved Duct Test Rig (CDTR) is designed to test aircraft engine nacelle liner samples in an environment approximating that of the engine on a scale that approaches the full scale dimensions of the aft bypass duct. The modal content of the sound in the duct can be determined and the modal content of the sound incident on the liner test section can be controlled. The effect of flow speed, up to Mach 0.5 in the test section, can be investigated. The results reported in this paper come from a study to evaluate the effect of duct configuration on the acoustic performance of single degree of freedom (SDOF) perforate-over-honeycomb liners. Variations of duct configuration include: asymmetric (liner on one side and hard wall opposite) and symmetric (liner on both sides) wall treatment; inlet and exhaust orientation, in which the sound propagates either against or with the flow; and straight and curved (outlet is offset from the inlet by one duct width) flow path. The effect that duct configuration has on the overall acoustic performance is quantified. The redistribution of incident mode content is shown, in particular the mode scatter effect that liner symmetry has on symmetric and asymmetric incident mode shapes. The Curved Duct Test Rig is shown to be a valuable tool for the evaluation of acoustic liner concepts.