Deactivation mechanism of Ni supported on Mg-Al spinel during autothermal reforming of model biogas

Abstract Nickel supported on Mg-Al oxides was studied in the autothermal reforming (ATR) of model biogas at 700 °C. Ni/Mg 0.4 Al 2 O 3.4 deactivated with time on stream and the cause of deactivation was investigated and identified. Ni was readily oxidized to NiO in the presence of O 2 . While NiO was essentially inactive for the reforming reaction, this oxide was yet active for methane combustion. Exhaustion of the O 2 supply at front of the catalyst bed enabled the remaining CH 4 to be steam and dry reformed on the metallic Ni left downstream. Gradual formation of NiAl 2 O 4 spinel was also observed, likely caused by the higher temperature prevailing in the exothermic combustion zone that favors the diffusion of nickel cations into the alumina structure. In contrast to NiO, NiAl 2 O 4 spinel was poorly active for CH 4 oxidation. The frontline associated with the formation of the NiAl 2 O 4 spinel phase eventually reached the end of the catalyst bed, resulting in a complete loss of activity. No significant coke deposition could be evidenced here. The Ni deactivation profile was adequately fitted using a methane ATR kinetic model that included a linear decrease in the number of Ni metallic sites. Addition of Rh/Mg 1.1 Al 2 O 4.1 in front of a nickel-based catalyst led to a stable activity. Using this dual-bed system, no NiAl 2 O 4 formation was identified after reaction.