Mechanical and elution properties of G3 Low Viscosity bone cement loaded up to three antibiotics

Abstract Objective Periprosthetic Joint Infection (PjI) is considered one of the most difficult complication to manage after total knee or hip arthroplasty, with a mean incidence of 1%. Antibiotic loaded bone cement is used as prophylaxis during primary arthroplasty and as local therapy during two-stage revision. The aim of this study is to evaluate the mechanical and elution properties of G3 Low Viscosity Bone Cement (G-21 San Possidonio, Modena, Italy) loaded with different doses of up to three antibiotics (12 specimens). Methods Compressive Strength, Bending Strength and Bending Modulus were evaluated. Cumulative Vancomycin elution by adding different doses of antibiotics was evaluated. Results The mean Compressive Strength was 81.55 MPa, the mean Bending Strength was 2161.7 MPa, and the mean Bending Modulus was 36.6 MPa. The highest cumulative Vancomycin elution was observed in specimen 12 (1906.9 mg at 2 weeks). This is the first study, at our knowledge, that analysed how cement mechanical properties, and antibiotic elution kinetics, are modified by adding up to three antibiotic. Conclusion The results obtained in this pilot study using G3 Low-Viscosity Bone Cement, demonstrated that mechanical properties not decrease significantly by adding large doses of antibiotics, while the Vancomycin elution increase until swelled to twice.