language-icon Old Web
English
Sign In

Auroral all-sky camera calibration

2014 
Abstract. A two-step procedure to calibrate the spectral sensitivity to visible light of auroral all-sky cameras is outlined. Center pixel response is obtained by the use of a Lambertian surface and a standard 45 W tungsten lamp. Screen brightness is regulated by the distance between the lamp and the screen. All-sky flat-field correction is carried out with a 1 m diameter integrating sphere. A transparent Lexan dome at the exit port of the sphere is used to simulate observing conditions at the Kjell Henriksen Observatory (KHO). A certified portable low brightness source from Keo Scientific Ltd was used to test the procedure. Transfer lamp certificates in units of Rayleigh per Angstrom (R/A) are found to be within a relative error of 2%. An all-sky camera flat-field correction method is presented with only 6 required coefficients per channel.
    • Correction
    • Source
    • Cite
    • Save
    • Machine Reading By IdeaReader
    6
    References
    5
    Citations
    NaN
    KQI
    []