Deterioration of wood-based boards subjected to outdoor exposure in Tsukuba

Various types of wood-based boards were analyzed for deterioration after being exposed to an outdoor environment for 5 years in Tsukuba, Japan. In phenol–formaldehyde resin bonded particleboard (PB(PF)) and aspen oriented strand board (OSB(aspen)), longer exposure caused a greater reduction in the modulus of rupture and internal bond strength, an increase in the coefficients of variation, and a decrease in 95 % lower tolerance limit at the 75 % confidence level (95TL). Nail-head pull-through and lateral nail resistance were also reduced by outdoor exposure, but their coefficients of variation and 95TL were not significantly affected. In contrast, methylene diphenyl diisocyanate bonded medium density fiberboard (MDF(MDI)) only showed a slight deterioration of these properties even after 5-year exposure, and the coefficients of variation and 95TL hardly changed. After 5-year exposure, the retention of shear load in one-plane at relative displacement of 1.0 mm was high in MDF(MDI) and OSB(aspen) at 93.5 and 78.5 %, respectively, but low in PB(PF) at 41.1 %. As with PB(PF), OSB(aspen) also showed a sharp decrease in the modulus of rupture and internal bond strength, but only slightly reduced shear load in one-plane.