Effects of Process Parameters on Microstructure and Cracking Susceptibility of a Single Crystal Super-Alloy Fabricated by Directed Energy Deposition
2020
As an advanced material forming method, additive manufacturing (AM) has been rapidly developed in many industry fields. Due to the non-weldability of nickel-based single crystal (SX) super-alloys and complex solidification and stress conditions of AM process, hot cracks can easily form in depositions. Previous research focused on the additive manufacturing of single-track thin-walled SX samples, while effective solutions to fabricate crack-free multi-track SX block samples are still limited. Directed energy deposition (DED) technique was used to fabricate multi-track block samples in this work. The effects of the overlapping ratio, scanning velocity, and laser power on the microstructure and cracking susceptibility were analyzed. The experimental results demonstrated that improper process parameters play significant roles in the formation of high-angle grain boundaries and large internal stress, both of which will increase the cracking susceptibility. Crack-free SX multi-track block was successfully fabricated after adjusting the process parameters. These findings provide a guide to reduce the cracking susceptibility by controlling the process parameters, which aids in fabrication of large-scale crack-free SX blocks through DED technique.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
0
References
0
Citations
NaN
KQI