Miscibility and fracture toughness of thermoplastic polyurethane/poly(vinyl chloride)/nitrile rubber ternary blends with special reference to the blend composition

Ternary blends of thermoplastic polyurethane and a poly(vinyl chloride)/nitrile rubber blend were investigated in this work. The blends, with weight ratios of 100/0, 80/20, 40/60, 60/40, 80/20, and 0/100, were prepared via melt blending. Dynamic mechanical analysis showed that the blends with ratios of 20/80 and 80/20 were miscible, whereas the 40/60 and 60/40 blends were partially miscible. IR spectroscopy studies showed shifts in the peaks due to specific interactions in the blends. The blends showed degradation behavior between the blend components. The fracture toughness was investigated with the J-integral by the locus method; the components and the miscible blends had good fracture toughness, whereas the other blends had lower toughness. Similar behavior was observed for the tensile properties. Scanning electron microscopy studies showed the morphological variations in the blends. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1763–1770, 2005