A three-dimensional nodal method with Channel-wise Intrinsic Axial Mesh Adaptation
2015
Abstract In a conventional coarse mesh nodal method the more accurate treatment of intra-nodal axial heterogeneity requires iterative axial node re-homogenization using axial flux profiles either reconstructed from core-wise coarse mesh solution or obtained from channel-wise axial fine mesh calculation. In this paper a new nodal method formulation, using Channel-wise Intrinsic Axial Mesh Adaptation (CIAMA), is proposed to solve this problem in a more fundamental way. For a given transverse (radial) leakage, along each axial channel a rigorous sub-node heterogeneous calculation is performed with the explicit axial heterogeneity within each coarse axial node. However, the transverse leakage between the axial channels is still calculated on the basis of coarse axial nodes, using the axially averaged radial current in each coarse axial node. Since the coupling between the axial channels is through the coarse axial nodes, it is not necessary to match the boundaries of the axial sub-nodes of neighboring axial channels in order to incorporate the axial sub-node calculation as an intrinsic part of the whole core global calculation. Therefore in the CIAMA nodal method, each axial channel is allowed to have its own sub-nodes adapting to its own axial heterogeneity variation. The CIAMA method has been implemented in the commercial code EGRET, which is used to qualify CIAMA. Excellent results of modeling fuel grid and control rod movement are presented. Application of CIAMA to three-dimensional pin-by-pin core calculation is also discussed and demonstrated to work well.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
13
References
0
Citations
NaN
KQI