The Fabrication of W-Cu Modified Layers on the Surface of the Continuous Casting Machine Mould Copper Plate by Infiltration
2011
In this paper, a new method named infiltration was applied to fabricate W-Cu surface modified layers of copper mould firstly in order to promote the life span of the continuous casting machine (CCM) mould. Our efforts concentrated on fabricating the W-Cu modified layers on the surface of mould copper plate by presintering and infiltration under inert gases. The W particle size and sintering temperature of W skeleton were adjusted to gain homogeneous microstructure of W-Cu modified layers. The results show that homogeneous microstructure of W-Cu modified layers can be obtained with the method of presintering and infiltration. For the excellent microstructure of W-Cu modified layers, the suitable tungsten particle size is 300 meshes and the optimal presintering temperature is about 1300°C. W-Cu modified layers have good bonding strength with copper substrate.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
8
References
1
Citations
NaN
KQI