Pressurized liquid extraction versus other extraction techniques in micropreparative isolation of pharmacologically active isoflavones from Trifolium L. species

Abstract As a new sample preparation technique, pressurized liquid extraction (PLE), in combination with reversed-phase liquid chromatography (RP-LC) and photodiode-array (PDA) detection were used for the isolation and determination of phytoestrogenic isoflavones in hydrolyzed extracts obtained from aerial parts of five Trifolium L. (clover) species. To optimize the effectiveness of PLE procedure, variable extraction parameters: methanol and acetone (or their 75% aqueous solutions), as extraction solvents, temperatures (75, 100 and 125 °C) and the changeable number of static extraction cycles were tested. Additionally, two other micropreparative techniques: ultrasound-assisted extraction (UAE), and conventional solvent extraction (CSE), under optimized conditions, were also used and compared. Optimum extraction efficiency, expressed in the highest yield of biochanin A, formononetin, daidzein and genistein from plant material, with PLE, using methanol–water (75:25, v/v) as an extraction solvent, an oven temperature of 125 °C and three 5-min static extraction cycles, was obtained.