An eye irritation test protocol and an evaluation and classification system.

Abstract An in vivo test protocol and an evaluation and classification system for the determination of eye irritation potential of chemicals and mixtures (substances) is proposed. The protocol uses two or three rabbits and reduces distress in test animals. The test substances are classified as non-irritant, irritant or severe irritant to meet regulatory needs. They may be classified on the basis of past experience with similar compounds or mixtures. Screens such as structure-activity relationships, pH extremes, validated and accepted in vitro tests, severe dermal irritation (primary dermal irritation index ⩾ 5) or severe dermal toxicity (lethality at in vivo test permits the use of one rabbit and instillation of 0.01 ml (0.01 g) of the test material into the cornea. Materials that are not classified irritant or severe irritant by screens or severe irritant by one rabbit test are tested in two or three rabbits; 0.1 ml (0.1 g) is instilled into the conjunctival sac. The responses (corneal opacity, iritis and conjunctival redness) are scored according to the modified Draize scoring system at 24, 48 and 72 hr and 7 days post-instillation. A rabbit is considered positive when corneal opacity of 1 or above, iritis of 1 or above or conjunctival redness of 2 or above is present at 24, 48 or 72 hr post-instillation. The material is classified as a severe irritant when the rabbit in the one-animal test or two or more rabbits in the standard test have responses of corneal opacity of 3 or above and iritis of 2 at 24, 48 or 72 hr, or positive responses on day 7 after instillation. The material is classified as an eye irritant when two or more rabbits are positive but the responses are not severe and they clear 7 days after instillation. The material is classified as a non-irritant when no more than one rabbit is positive. The opinions expressed in this article are those of the authors and do not necessarily reflect the views of US Federal agencies.