Towards the construction of the inner zone of the CBM-TOF wall
2020
The Time-of-Flight (TOF) subsystem, one of the core detectors of the CBM experiment, is dedicated to the identification of all charged hadrons produced in beam-target interaction. The targeted system time resolution of 80 ps and an efficiency above 90% should be maintained at a particle flux up to 30 kHz/cm2 in the region of low polar angles. In order to cope with these challenging requirements, CBM-TOF wall will be equipped with Multi-Gap Resistive Plate Counters with Multi-Strip readout (MSMGRPC).Our R&D activity has been focused on the development of a MSMGRPC prototype for the most demanding region of the CBM-TOF wall, the region of low polar angles (from 2.5° to ~12° around the beam pipe). The results obtained in heavy ion in-beam tests have demonstrated the performances of the developed prototypes in conditions of exposure of the whole active area to high flux and high multiplicity reaction products. The latest developed prototypes have an optimized design which fulfills simultaneously two important requirements for MSMGRPCs, the granularity for the inner zone of the CBM-TOF subdetector and the impedance matching to the front-end electronics. Based on the obtained in-beam test results and the architecture of the developed prototypes, a modular structure of 12 units called modules is proposed. A total number of 470 MSMGRPCs (~30000 readout channels) assures an uniform coverage of the active area.
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
12
References
0
Citations
NaN
KQI