On the effect of W addition on microstructural evolution and γ′ precipitate coarsening in a Co-30Ni-10Al-5Mo-2Ta-2Ti alloy
2020
Abstract The effect of replacement of molybdenum with small amount of tungsten on the stability of cobalt base superalloys of Co-Ni-Mo-Al-Ta-Ti class has been presented. A small addition of Tungsten (W) in Co 30Ni (5-x)Mo xW 10Al 2Ti 2Ta alloys stabilizes the cuboidal morphology of precipitates and increases the γ′ volume fraction. A 2 at% addition of W causes an increase of 60 °C in solvus temperature of the base superalloy to reach a value of 1130 °C with a slight increase of mass density to 8.79 g/cc. Beside partitioning into γ′, W also shifts the partitioning preference of Mo from the γ′ phase in 0W alloy to that of equal partitioning in both γ and γ’ phases in 2W alloy. An interfacial confinement of Mo atoms could be observed at the γ/γ′ interface that reduces interface energy leading to enhanced microstructural stability. The experimentally determined temporal evolution of average precipitate size in the 2W alloy at the temperatures of 800, 900 and 950 °C suggests a matrix diffusion limited coarsening kinetics. The estimated coarsening rate constant at 900 °C follows a quasi-steady state model and is comparable to those observed for W and Re containing Co-based superalloys. The activation energy for γ′ precipitate coarsening is estimated to be 258 ± 6 kJ/mole, which is comparable to the Mo diffusion in the γ-Co matrix suggesting Mo diffusion still controls the precipitate coarsening in the 2W alloy.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
70
References
9
Citations
NaN
KQI