Validation of the applicability of a creep model for directionally solidified eutectics with a lamellar microstructure
2016
Depending on the process parameters, the directional solidification (DS) of eutectic alloys leads to a fibrous or lamellar microstructure. A physically motivated creep model which was evaluated for a DS-eutectic with a fibrous microstructure is applied to a DS-eutectic with a lamellar microstructure. Creep curves are simulated and compared to experimentally measured ones. It is shown, that the simulation is in good agreement with the experiment. (© 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
7
References
2
Citations
NaN
KQI