Morphological changes of tungsten surfaces by low-flux helium plasma treatment and helium incorporation via magnetron sputtering

The effect of helium on the tungsten microstructure was investigated first by exposure to a radio frequency driven helium plasma with fluxes of the order of 1 × 1019 m–2 s–1 and second by helium incorporation via magnetron sputtering. Roughening of the surface and the creation of pinholes were observed when exposing poly- and nanocrystalline tungsten samples to low-flux plasma. A coating process using an excess of helium besides argon in the process gas mixture leads to a porous thin film and a granular surface structure whereas gas mixture ratios of up to 50% He/Ar (in terms of their partial pressures) lead to a dense structure. The presence of helium in the deposited film was confirmed with glow-discharge optical emission spectroscopy and thermal desorption measurements. Latter revealed that the highest fraction of the embedded helium atoms desorb at approximately 1500 K. Identical plasma treatments at various temperatures showed strongest modifications of the surface at 1500 K, which is attributed to t...