Fiber ring laser for axial micro-strain measurement by employing few-mode concentric ring core fiber
2017
Abstract We proposed and demonstrated a novel few-mode concentric-ring core fiber (FM-CRCF) for axial micro-strain measurement with fiber ring laser based on few-mode-singlemode-few-mode fiber structure. The core area of CRCF consists of four concentric rings which refractive indices are 1.448, 1.441, 1.450, 1.441, respectively. LP 01 and LP 11 are two dominated propagating mode groups contributing in the CRCF. In this few-mode-singlemode-few-mode structure, two sections of CRCF act as the mode generator and coupler, respectively. The basis of sensing is the center single mode fiber. Moreover, this structure can be used as an optical band-pass filter. By using fiber ring cavity laser, the axial micro-strain sensing system has high intensity (∼20 dB), high optical signal to noise ratio (∼45 dB) and narrow 3 dB bandwidth (∼0.1 nm). In the axial micro-strain range from 0 to 1467 μ e , the lasing peak wavelength shifts from 1561.05 nm to 1559.9 nm with the experimentally sensitivity of ∼ 0.81 pm / μ e .
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
26
References
6
Citations
NaN
KQI