Thermoresponsive starch-based particle-stabilized Pickering high internal phase emulsions as nutraceutical containers for controlled release

Abstract Pickering high internal phase emulsions (HIPEs) stabilized solely by bioderived starch-based particles hold potential for application in the food and pharmaceutical fields. This paper reports the use of a thermoresponsive 2-hydroxy-3-butoxypropyl starch (HBPS) particle as a representative natural biocompatible material for use as an effective stabilizer for HIPE formation. HBPS is synthesized by using butyl glycidyl ether as a hydrophobic reagent to change the hydrophobic–hydrophilic balance of starch, and then starch-based particles are fabricated by a simple nanoprecipitation procedure. The size of particles increased with an increase in temperature, and the particles are essentially monodisperse with a PDI of about 0.1 when the temperature was above 15 °C. These HBPS particles were subsequently used as an effective stabilizer to fabricate stable oil-in-water (o/w) Pickering HIPEs with an internal phase volume of 80% at different stabilizer concentrations. The results demonstrated that increasing the particle concentration is conducive to the formation of stable Pickering HIPEs with greater stiffnesses. In addition, the nutraceutical material (β-carotene) was encapsulated into HIPEs and in vitro release experiments revealed that the release in this system can be controlled by adjusting the temperature.