Monitoring of TiO2-catalytic UV-LED photo-oxidation of cyanide contained in mine wastewater and leachate.

Abstract A photo-oxidation process using UV-LEDs and TiO 2 was studied for removal of cyanide contained in mine wastewater and leachates. This study focused on monitoring of a TiO 2 -catalyzed LED photo-oxidation process, particularly emphasizing the effects of TiO 2 form and light source on the efficiency of cyanide removal. The generation of hydroxyl radicals was also examined during the process to evaluate the mechanism of the photo-catalytic process. The apparent removal efficiency of UV-LEDs was lower than that achieved using a UV-lamp, but cyanide removal in response to irradiation as well as consumption of electrical energy was observed to be higher for UV-LEDs than for UV-lamps. The Degussa P25 TiO 2 showed the highest performance of the TiO 2 photo-catalysts tested. The experimental results indicate that hydroxyl radicals oxidize cyanide to OCN − , NO 2 − , NO 3 − , HCO 3 − , and CO 3 2− , which have lower toxicity than cyanide. In addition, the overall efficacy of the process appeared to be significantly affected by diverse operational parameters, such as the mixing ratio of anatase and rutile, the type of gas injected, and the number of UV-LEDs used.