A COMPONENT-SPECIFIC ALLOY DESIGN OF TiAl INTERMETALLICS
2009
The metallographic observation and analyses of TiAl alloy cast ingots revealed that the preferably arranged γ/α_2 lamellar microstructure can be obtained in columnar dendritic cast ingot through controlling the Ti/Al atomic ratio. The experiments conf irmed that the preferably arranged γ/α_2 lamellar microstructure has excellent tensile strength and fracture toughness and tolerant tensile plasticity when the stress is applied parallel to the γ/α_2 interface.Based on these results and the working condition of the turbine blades,a component-specific alloy design has been suggested.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
0
References
0
Citations
NaN
KQI