Embryo location in the uterus during embryo transfer: An in vitro simulation.

Objective To evaluate the location of transferred embryos under various parameters during embryo transfer in in vitro fertilization (IVF) by applying an in vitro experimental model for embryo transfer (ET). Methods Mock ET simulations were conducted with a laboratory model of the uterine cavity. The transfer catheter was loaded with a sequence of air and liquid volumes, including development-arrested embryos donated by patients. The transfer procedure was recorded using a digital video camera. An orthogonal design, including three independent variables (uterine orientation, distance of the catheter tip to the fundus, and injection speed) and one dependent variable (final embryo position), was applied. Results The uterine cavity was divided into six regions. The distribution of the transferred matter within the uterine cavity varied according to the uterine orientation. Medium speed-injected embryos were mostly found in the static region while fast- and slow-speed injected embryos were mostly found in the fundal region and the cervical-left region, respectively. The possibility of embryo separation from the air bubble increased from 11.1% in slow injection cases to 29.6% and 48.1% in medium and fast injection cases, respectively. Conclusion The experimental model provides a new method for investigating ET procedures. Fast injection of embryos into a retroverted uterus may be more likely to result in embryo separation from the air bubble.