A new high-velocity oxygen fuel process for making finely structured and highly bonded inconel alloy layers from liquid feedstock

High-velocity oxygen fuel (HVOF) thermal spray processes are used in applications requiring the highest density and adhesion strength, which are not achievable in most other thermal spray processes. Similar to other thermal spray processes, however, a normal HVOF process is unable to apply fine powders less than 10 µm via a powder feeder. The advantages of using smaller and even nanosized particles in a HVOF process include uniform microstructure, higher cohesion and adhesion, full density, lower internal stress, and higher deposition efficiency. In this work, a new process has been developed for HVOF forming of fine-grained Inconel 625 alloy layers using a liquid feedstock containing small alloy particles. Process investigations have shown the benefits of making single and duplex layered coatings with full density and high bond strength, which are attributed to the very high kinetic energy of particles striking on the substrates and the better melting of the small particles.