Surface morphology improvement of three-dimensional solar cell with Cu2ZnSnS4 absorber
2013
Abstract Solar cells with a three-dimensional (3D) structure were fabricated with a Cu 2 ZnSnS 4 (CZTS) absorber (CZTS 3D-cell). CZTS absorbers were deposited by spray pyrolysis deposition (SPD) onto CdS buffer layers and then annealed in a nitrogen atmosphere without a cover, with a SLG plate cover, and with a CZTS covering layer deposited on a 3D substrate. The short circuit current density ( J sc ) was improved by annealing with a CZTS covering layer, due to a reduction of cracks on the surface of the CZTS absorber. A CZTS 3D cell was then fabricated using a solution with lower sulfur concentration to suppress the evaporation of S, which resulted in a reduction of holes on the surface of the CZTS absorber and an increase in J sc and the conversion efficiency ( η ). The η value was 1.13%, which is the highest efficiency for a CZTS 3D-solar cell to our knowledge.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
17
References
19
Citations
NaN
KQI