Binding evaluation of the combination between the superconductor and matrix by ultrasonic spectra

Abstract Combination of the superconductor and high conductive normal metal is now indispensable in the practical use of superconducting magnet. And the binding property of both materials is one of the key points whether superconductive characteristics are fully attained or the current fails prematurely in the practical magnet. But this binding evaluation is not so easy, because even in the mechanically well-jointed conductor, it often appears poor in electric and magnetic joint in cryogenic temperature. Since we have examined and reported fundamental AE properties of superconductor from UI-91, UI-93, UI-95, and UI-97, we have found the simple but important discovery for getting new information about the binding evaluation. Here we report a new technique for evaluating these bindings by observing ultrasonic spectra when a normal transition is propagated along the superconductor. We have discovered that a good contacting conductor has an emission of this sound with sharp resonating frequency peak or peaks at around the highest spectrum area; from 0.5 to 1.0 MHz. Our interpretation of the evaluations are so simple that we can say that binding degrees are best, good or bad, according to the resonating Q -value at around the highest spectrum of the ultrasonic sound.