Investigation of Shielding Effects on Picosecond Laser-Induced Copper Plasma Characteristics under Different Focusing Distances

In traditional laser-induced breakdown spectroscopy (LIBS) applications, the line intensity and analysis capability are susceptible to plasma shielding. To investigate the shielding effects on the characteristics of Cu plasma in air, a ~120-picosecond laser with a wavelength of 1064 nm was employed to produce plasma. The plasma temperature and electron density were calculated under the condition of local thermal equilibrium (LTE) and optically thin, while the relationships between the line intensity, plasma temperature and electron density were analyzed. Moreover, the LTE condition was validated by the McWhirter relation, plasma relaxation time and diffusion length, and the optically thin condition was observed through the variation in line intensity. The results indicated that when the focal point was below the target surface, the plasma shielding was the weakest, and the highest line intensity could be obtained. In addition, there was a positive correlation between the increased plasma temperature and the degree of shielding effect. When the focal point was above the target surface, the high-irradiance pulse directly broke down the free air and produced a shock wave. Under the high pressure of the over-heated shock wave, the line intensity, plasma temperature and electron density increased again. This study provides an important insight into the experiments and applications of picosecond LIBS.