Screw pullout strength: a biomechanical comparison of large-fragment and small-fragment fixation in the tibial plateau.

Objectives: To compare the pullout strengths of 6.5-millimeter diameter partially threaded cancellous screws and 4.5-millimeter diameter fully-threaded cortical screws versus 3.5-millimeter diameter cortical screws in the proximal tibia. Design: Three screws were inserted in the lateral tibial plateau of each leg of fifteen paired cadaveric tibias. In one tibia, large-fragment fixation was used, consisting of a unicortical 6.5-millimeter screw in the subchondral bone, and bicortical 4.5-millimeter screws in the metadiaphyseal and diaphyseal bone. In the contralateral tibia, small-fragment fixation consisting of three 3.5-millimeter screws was used, placing the screws in the same positions as described above. Main Outcome Measurements: A materials-testing machine was used to determine axial pullout strengths of each screw. The mean pullout strengths of large-fragment and small-fragment screws in each position were compared. Results: No significant difference in pullout strengths was found between the large-fragment and small-fragment screws in subchondral and metadiaphyseal bone. A statistically significant difference was found between pullout strengths of large-fragment and small-fragment screws in diaphyseal bone. Conclusions: In human proximal tibial bone, the data from this study do not suggest that the pullout strength of 3.5-millimeter screws differs from that of 6.5-millimeter screws in subchondral bone, or that the pullout strength of 3.5-millimeter screws differs from that of 4.5-millimeter screws in metadiaphyseal bone. However, the pullout strength of 3.5-millimeter screws is significantly less than that of 4.5-millimeter screws in diaphyseal bone. The authors of the present study believe this supports the use of small-fragment fixation in the treatment of tibial plateau fractures.