Design and analysis of a thermal core for a high performance light water reactor

Abstract The High Performance Light Water Reactor is a Generation IV light water reactor concept, operated at a supercritical pressure of 25 MPa with a core outlet temperature of 500 °C. A thermal core design for this reactor has been worked out by a consortium of Euratom member states within the 6th European Framework Program. Aiming at peak cladding temperatures of less than 630 °C, including uncertainties and allowances for operation, the coolant is heated up in three steps with intermediate coolant mixing to eliminate hot streaks. Different from conventional reactors, the radial power profile is intended to be non-uniform, with the highest power in the first heat-up step in the core center and the lowest power in the second superheater step to result in the same peak cladding temperatures in each region. The concept has been studied with neutronic, thermal-hydraulic and structural analyses to assess its feasibility. Coupled neutronic/thermal-hydraulic analyses are defining the initial distribution of enrichment, control rod positions and the use of burnable poisons. Sub-channel analyses predict the coolant mixing inside assemblies, and a porous media approach simulates the flow of moderator water between assembly boxes. Finally, structural analyses of the assembly boxes are needed to minimize deformations during operation. Even though the core design cannot yet considered to be final, this state of the art review shall summarize the progress achieved so far and outline the remaining challenges.