Magnetic titanium/carbon nanotube nanocomposite catalyst for oxidative degradation of Bisphenol A from high saline polycarbonate plant effluent using catalytic wet peroxide oxidation

Abstract In this study, a magnetic titanium nanotube/carbon nanotube nanocomposite (magnetite TNT@CNT nanocomposite) was developed and its efficiency was evaluated towards oxidative degradation of Bisphenol A (BPA) from high saline polycarbonate plant wastewater (PCW) using catalytic wet peroxide oxidation (CWPO). The characterization of the nanocomposite was performed using XRD, SEM, BET surface area, FT-IR, and VSM analysis. The effects of operating conditions, including solution pH, H 2 O 2 dosage, reaction temperature and catalyst loading, were optimized in the CWPO process for degradation of BPA in the PCW. In the best obtained experimental condition, at pH of 6.30, H 2 O 2 dosage of 2.5 g/L, temperature of 70 °C and 100 mg/L of catalyst dosage, CWPO process exhibits the best catalytic performance with the complete BPA degradation, 68.78% of COD removal and 47.14% of TOC reduction for PCW being obtained. The role of hydroxyl radicals in the reaction mechanism was shown by indirect analysis i.e. tert Butanol (tBuOH) scavenging experiment. Under the optimum experimental conditions, the stability and reusability of the nanocomposite was demonstrated with slight decline ( 5 /COD ratio being obtained, namely from 0.1 (indicating non-biodegradability) to 0.43 (showing biodegradability by means of biological treatment) and AOS and COS were increased to 2.26 and 3.08, respectively. Overall, the CWPO process with magnetite TNT/CNT nanocomposite, due to the simple and easy in-situ catalyst recovery/separation and good catalytic activity, can be considered as a promising destructive technology for industrial wastewater treatment.