Status of the Sardinia Radio Telescope as a receiver of the BIRALET bi-static radar for space debris observations

Space debris are human-made objects, of variable sizes and shapes, that orbit the Earth or reenter the atmosphere. They represent a serious problem for every active spacecraft and satellite, due to the high risk of collision and consequently the generation of new debris. One of the main segments of the Space Situational Awareness program regards space surveillance and tracking activities, with procedures for tracking resident space objects, using a sensor network composed by radars, telescopes and lasers. In this way, it is possible to collect data in order to catalogue and perform orbit predictions of objects orbiting the Earth, with the aim of avoiding collisions between them. One of the Italian radars for space and surveillance tracking functions is represented by the BIRALET system, an acronym which stands for Bistatic Radar for LEO Tracking. This radar operates in P-band at 410-415 MHz, is a bi-static configuration composed of a transmitting 7-meter antenna and the SRT (Sardinia Radio Telescope) as receiver, with a baseline of about 20 km. The Sardinia Radio Telescope is a 64-meter fully steerable wheel-and-track antenna, located near San Basilio (Cagliari, Sardinia, Italy). It represents a flexible instrument used for radio astronomy and space science studies, developed to work in a wide frequency range between 300 MHz and 110 GHz. In this paper, we present a review of the status of the SRT for space debris observation. In particular, we describe three possible system configurations, in order to perform Doppler shift and range measurements. In particular, we present a simplified solution based on a spectrum analyzer as a back-end that permits only Doppler shift measurements. Another more complex solution for Doppler shift measurements, is based on the electronic Red Pitaya board. For the Red Pitaya we developed also a dedicated signal acquisition chain with a down-conversion circuit, in order to shift the received signal in the frequency range of the board. Finally, a more complex solution that allows range and range rate measurements, based on the National Instrument USRP board as a back-end. For future developments, we present the possibility to improve our system, using a C-band Phased Array Feed as a receiver.