Microstructural characteristics and adsorption potential of a zeolitic tuff–metakaolin geopolymer
2015
The aim of this work is to investigate the microstructural characteristics and the adsorption potential of zeolitic tuff–metakaolin (ZM) geopolymers. For the identification of microstructure, X-ray diffraction (XRD) and scanning electron microscope (SEM) analyses were used. XRD showed that mordenite, a major zeolite mineral, disappeared upon geopolymerization, while SEM showed that ZM-geopolymers exhibit a uniform porous matrix consisting of nanoparticles (~40 nm). The adsorption efficiency of ZM-geopolymers was assessed using solutions containing 250 mg/L copper. The experimental results show that the maximum adsorption efficiency (7.8 mg Cu 2+ /g of adsorbent) is observed at an initial zeolitic tuff/metakaolin ratio of 0.5 which indicates that ZM-geopolymers can be used in environmental applications including the clean-up of industrial effluents and wastewaters.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
34
References
26
Citations
NaN
KQI